Fyre-Tec Fire Rated Windows

• U.L. Listed & Labeled 3/4 hr. and 1 hr. Fire Protection
• Field-Proven Dependability
• Non-Industrial Appearance
• Matching Non-Rated Steel Windows Available
• Meets or exceeds most Air Infiltration, Water Penetration, and Structural Performance Requirements

The Fyre-Tec window is a clean, precisely designed steel Horizontal Slide, Single Hung, Fixed Lite, Projected, or Casement window. Construction is roll formed steel sections with welded corners which make our products exceptionally strong and long-lasting.

All Fyre-Tec fire window frames are Listed by Underwriters Laboratories under the category of Door and Window Frames (GVTV). The standard used to evaluate the windows is UL 9, Fire Tests of Window Assemblies.

Series 900
Horizontal Slider

Horizontal Slider windows operate by moving the sash either left or right. Horizontal Sliders offer elegant lines, smooth operation and a more contemporary look than traditional double hung window.

Details

Series 925
Single Hung

In a Single Hung window the bottom sash moves vertically, while the upper sash remains stationary. Single Hung windows allow ventilation through a single operable lower sash. When opened, the bottom sash covers the upper sash.

Details

Series H925
Heavy Single Hung

In a Single Hung window the bottom sash moves vertically, while the upper sash remains stationary. Single Hung windows allow ventilation through a single operable lower sash. When opened, the bottom sash covers the upper sash. This window incorporates a heavier 4" deep frame.

Details

Series 950
Fixed Lite

A Fixed Lite is a window where a single sash is fastened permanently in a frame and cannot be operated in any way. Maximum security and lots of natural light are benefits with the use of Fixed Lite windows.

Details

Series H950
Heavy Fixed Lite

A Fixed Lite is a window where a single sash is fastened permanently in a frame and cannot be operated in any way. Maximum security and lots of natural light are benefits with the use of Fixed Lite windows. This window incorporates a heavier 4" deep frame.

Details

Series 975
Awning / Projected

Awning windows are hinged on the top and open outward from the bottom, allowing for ventilation and protection from the rain. They glide open and shut with the turn of one easy-to-reach handle.

Details

Series 985
Casement

Casement windows are hinged on the side and Push open outward to the left or right allowing for full top to bottom ventilation. Casement windows give you the flexibility to group them in combinations and provide a clear view to the outdoors.

Details

The Fyre-Tec window is the preferred design when steel fire windows are specified in building code requirements.

Automatic heat closure devices (Heat activated fusible links) are standard for all operating windows. Horizontal Sliding windows may also be equipped with a resettable device which may be activated by a fire or smoke alarm, computer or other electrical signal. They provide even greater building and occupant safety.

Fyre-Tec windows are also ideal as replacement windows for older buildings that are required to meet up-dated code stipulations. They are aesthetically compatible with all types of architecture and with adjacent windows and doors in the building. For replacement or new construction, the field-proven steel fire window is Fyre-Tec.

Sub-frame mounting or fin system mounting kits are supplied with all windows. The sub-frame mounting system is ideal for either retrofit or new construction. The window openings may be finished out prior to the installation of the provided sub-frame and window. The fin system is designed to allow installation of the window into the construction framing and subsequent trimming to the window.

Fyre-Tec windows accommodate a variety of UL fire rated glazing. All Fyre-Tec rated windows are factory glazed with either clear ceramics (1 hour labeled) or 1/4" wire glass (45 minute labeled). In addition Insulated Glass Units are available with optional Low-E glazing to reduce the infrared and ultraviolet light that comes through the glass. Glazing material is held in place with full-length roll-formed steel snap-in retainers.